Golden Bustle and Pattern Review

I know this blog has been quiet lately, I've been sewing but haven't had an opportunity to share my projects. Today I made some time after finishing this lobster tail bustle using this Truly Victorian pattern in the Regular style (it comes with Regular and Imperial styles, the Imperial is a larger bustle).

The finished bustle! 

I wanted to test this pattern on some fabric I had laying around before doing the nice custom order for a friend of mine. I'm glad I did as I found a few issues. The fabric for the bustle was actually a table cloth. I decided to use black thread and bias tape for a contrast to the gold. I also used thick, extra long wire ties that I had in my stash for the hoop boning. The pattern recommends steel and the Truly Victorian site sells precut pieces for each size.

First, this pattern is great in that its super easy to follow if you have a bit sewing experience. It goes together well and the pieces didn't need any adjusting to make them fit together. I didn't even fully mark the lines for the bias tape, just at the edges of the fabric and the inside of the center back seam. The pattern calls for single fold bias tape and I found that to be too thin for the width of the plastic wire ties I was using. I'm glad I noticed that before starting! 

The tapes were easy to sew on, even though they were curved. 

The pattern doesn't specify what pleats to use on the bottom, or even how to pleat it, so that's where some previous sewing skills would come in handy. I prefer the look of box pleats and think they give it a nice finish. The bottom could also be gathered for a fuller look. This is also where I noticed the plastic curves a lot at the bottom where metal hoops would probably curve less. 

Box pleats! 

The waist band is small, only about a quarter inch wide. I didn't add a hook and eye to close it since I cant decide if I prefer that or a snap. Also, I'd like to keep it open so its slightly adjustable, especially since this will probably be sticking around for a while as a prop for my other costumes. 

Waistband and front darts.

Overall, I would recommend this pattern to anyone who doesn't want to draft one on their own. As I've said, its easy to follow. One thing to keep in mind though, it does run small. I cut the fabric to be only one size smaller than my measurements but its actually two-three sizes too small. I would suggest checking the pattern before cutting expensive fabric! I would also recommend using steel boning as the plastic curves a bit too much and may also be a bit weak for heavier gowns. 

The front view. As you can see, the plastic wire ties curve a lot. 

Inside view of the boning casings. 

Add caption

Back view, it really does remind me of a lobster tail! 

Finished- Victorian!

This post is a few days late, but better late than never! I finished the blue Victorian that I've been working on for eons, last Friday. I just love the feeling of having large costumes completed! I had intended on this dress being more Steampunk but it ended up turning into this. I'll have to slowly work into using hardware instead of "frilly" adornments... ;-)

The bottom of the bodice was fixed so the edges are even, the buttons repositioned for a smoother front, and all those hand made yo-yo's stitched on! 

I realize that yo-yo flowers may not be period accurate but I have to admit I didn't do a lot of research on them. And Dorset buttons were more popular in earlier decades and eras but I thought they looked nice on anyways. Plus I couldn't find any store-bought ones I really liked. 

All these yo-yo's made me really thankful I bought the whole set of circular shapes!

Close-up of the buttons and a bit of the button holes. This was my first time applying hand bound button holes to a costume. I really like the look and it was pretty easy to do! 

I will say though, next time I plan on making a lot of pleats I will be buying a pleat board first. I made this pleated trim using a vinegar/water mix. The smell dissipates really quickly and the fabric stays set pretty much forever. 

I'd also like a completed bustle before making the next gown! This took a lot of careful measuring to make sure it would be even when worn! Plus my dress form is crooked. When I purchased it, the box was trashed and the form was bent. I've never been able to straighten it completely so it takes a bit of doubl-checking before I finish things. 

I have to say I'm happy with how it turned out, especially as this was my first Victorian. I had cut it to my measurements but unfortunately it ended up being several sizes too small, otherwise I might have modeled it myself! 

Finishes and Fixes

I finished the other Renaissance era shirt that I was given. Just like the last one, this one had to be completely taken apart and re-sewn. I decided to try a little imitation blackwork on it to see if I liked the look enough to try on future projects. Turns out I love it so I'm making plans for some men's and women's wear.

 

I'll definitely be doing the next embroidery by hand and of course larger, or more detailed. 

I made some more progress on the Victorian today and I'm discovering a few small issues that need fixing. The buttons had to be re-positioned after the buttonholes were finished. I'm not sure how that happened but at least that was an easier fix. 

I just love the way the buttons look with the matching piping! I cant wait to see it all finished with the rest of the trim! 

As the buttons went on, the bottom pieces didn't match up. So that needs to be fixed as well as some of the boning on the inside. It's slipping around in the casings so I need to stitch them up.

I am using a Truly Victorian pattern for this piece, with the sleeves omitted from the bodice. I cut the bodice and the skirt in the same sizes however, the skirt is miles larger than the waist of the bodice. So I'll also be taking apart the waist band and resizing to fit. I originally cut this to my measurements but there's no way it will fit me even with a corset. Sad but true! 

Oh yeah, I also need to invest in a nicer dress form. This one arrived bent in a trashed box and I was never able to fix it. I've got my eye on one of those fancy ones with arms... :)

Satin and Velvets and Crepe, Oh My!

I've been sewing like a crazy person lately! A friend graciously gave me a ton of fabrics and old clothing for upcycling and I've been trying desperately to make room for it all as I have a very small studio space. As it stands, half of it is in my closet! My best solution was to just start making things for my online stores. I recently finished and sold a Regency overdress in a dark hunter green. I'd never made one before so this was my first attempt. Since posting, I've had two custom requests for the same piece in different colors!

I am still slowly working on the blue Victorian bustle gown. A friend was interested in purchasing if it fit so I stopped working on it for a while until I could do a fitting just in-case I had to adjust anything. Well, it didn't fit so I'm finishing it up to sell! I decided to do the buttonholes by hand which is also something I've never done before. Its actually pretty relaxing and looks great with the Dorset buttons! 

The first item that I've listed so far, from the gifted fabrics, is suitable for Renaissance fairs. Its made more for comfort than accuracy in that it is slightly stretchy, only has boning to support the lacings, and there is elastic in the chemise. This was completed in a day and half, it would have been a day except I ran out of brown thread!

This dress can be found here. 

I have a couple of Renaissance era shirts left, a custom Regency overdress similar to the one above, and then I plan on starting this:

The nerdy side in me always wanted to do something medieval with a little fantasy thrown in! I'm not sure if I'll keep the sleeves as pictured. I like the idea of having them open and a fitted sleeve underneath. Please excuse the figure, all my croquis templates are of the modern form. ;-)